Introduction

When you’re dealing with foam, it can be tough to know exactly how much you need. For example, if you’re trying to use foam for a specific project, and the project requires one piece of foam that’s one inch thick but another piece that is only 0.75 inches thick, what do you do? And why does this matter? The answer is simple: An inch matters when it comes to custom cut foam — even if it doesn’t seem like a lot!

Did you know that a slice of bread is usually around an inch thick? Or that a mouse pad is also usually one inch thick? What about the fact that a standard pillow is 3 inches thick? When it comes to getting foam cut to size, the difference between one inch or quarter of an inch can make a huge difference.

Did you know that a slice of bread is usually around an inch thick? Or that a mouse pad is also usually one inch thick? What about the fact that a standard pillow is 3 inches thick? When it comes to getting foam cut to size, the difference between one inch or quarter of an inch can make a huge difference.

Here’s why:

When you order a piece of foam cut to size, there are two different ways it can get manufactured. First, there’s “one-sided” foam; second, there’s “two-sided” foam. With one-sided foam, only one side has been coated with latex and then dried before being cut into your desired size. This allows for easier cutting but doesn’t provide any extra cushioning support because only one side has much give in it at all! On the other hand (no pun intended) if you choose two-sided latex coating then both sides have been coated and dried beforehand which means maximum comfort without compromising on quality—and no more sore backs from sitting all day long at work!

The difference between a 1-inch piece of foam and a 0.75-inch piece of foam might not seem like much, but there are actually situations where that 0.25-inch can make all the difference. For example, if you are trying to cover your car seat, less than an inch in thickness might be exactly what you need to keep the seat cover from sliding around and from creating uncomfortable lumps or other issues.

The first step in using foam is to measure the thickness of your project. If it’s a simple area like your car seat, where you just want some extra padding, or even if it’s something more complex like a sofa cushions for your home theater, measuring will ensure that you choose the right thickness of foam for the job.

When choosing between different types of foam products, like viscoelastic or memory foam (also called viscoelastic), it’s important to know how much thicker each type is than another type because they’re both used differently and have different properties than traditional polyurethane foam products.

For example: If one type of product has a higher density than another then this means that there are fewer air pockets within its structure and therefore less space between each cell wall. This can lead to greater comfort levels since there aren’t any areas where body heat can build up since there isn’t much room between those walls either!

You wouldn’t want your custom foam cut too thin. If it’s too thin, it won’t protect your items as well as they should be protected. And while it may just be an inch (or less), sometimes that inch makes all the difference when you’re trying to figure out what will fit where.

If you’re cutting foam yourself, it’s important to know how thick of a piece of foam will fit into your project without creating gaps or causing problems. You can determine this by measuring the space where you want to put the piece of custom cut foam. Then measure out how thick that same size would be if it were fully expanded (i.e., “foam-thick”). This will give you an idea of how much room there is for errors in cutting when working with less than perfect materials (like those used in old couches).

Another thing that can help with getting an accurate measurement is doing a test run before hand on some scrap pieces so that when things go wrong, they don’t go too far wrong! It’s always good practice when working with any kind of new product or material (or even just different sizes/types) because then if something goes wrong later down line due unforeseen circumstances during installation process, everything else won’t fall apart around it too badly due breakage etcetera…

The bottom line is this: Whether you need your custom cut foam to have eight inches removed or whether you need it cut into small squares measuring only one square inch each, we can help. Our team of experts at Foam Factory Inc., is ready to deliver custom cut pieces to our clients according to their specifications — even if those specifications are ones we’ve never heard before!

Whether you need your custom cut foam to have eight inches removed or whether you need it cut into small squares measuring only one square inch each, we can help. Our team of experts at Foam Factory Inc., is ready to deliver custom cut pieces to our clients according to their specifications — even if those specifications are ones we’ve never heard before!

Custom cut pieces make the world go round—or at least they can make your working world a lot easier. If you’re like most people, then there’s probably something in your workspace that could benefit from some custom-cut foam: be it an office chair cushion or a display case for your collectibles. The bottom line is this: Whether you need your custom cut foam to have eight inches removed or whether you need it cut into small squares measuring only one square inch each, we can help! We’ll take care of everything so all you have left is worry free furniture seating — no matter where that seating happens on planet Earth.”

Conclusion

Remember, getting foam cut to size is a great way to customize your furniture and make it your own. And while one inch might not seem like a big difference, sometimes that extra bit of space can make all the difference in the world when it comes time for you to sit down on your couch and enjoy some TV!

# Thank You!!