4 Easy Steps to Choose the Best Foam for Your Seat Cushion

  • Post comments:0 Comments
  • Reading time:4 mins read


When you’re making a new seat cushion, it’s important to choose the best foam for the job. There are many options out there, but they don’t all work together in the same way. In this article, we’ll talk about four main factors that will help you pick the perfect foam for your custom seat cushion: density, firmness, softness and compression.


Density is the weight of the foam per unit volume. Density is measured in pounds per cubic foot (pcf) or kilograms per cubic meter (kg/m3). This is an important factor when choosing your foam because it directly affects how firm or soft a cushion will be. A higher density means that more material has been used to make up the foam, so it will be firmer and less likely to compress under weight. A lower density means that less material has been used, making it softer and more malleable even under heavy weights.


Firmness, or how much the cushion will sink in when you sit on it, is measured in pounds per square inch (PSI). The firmer the foam, the more PSI it has. You can measure firmness by sitting on the cushion and feeling how much it sinks in. Firm cushions should be between 20 and 50 PSI; medium cushions are between 50 and 80 PSI; soft ones are between 80 and 120 PSI; super-soft ones go above 120 PSI.

If your seat cushions aren’t comfortable enough for you to sit on them while they’re still new, they’ll likely become uncomfortable over time as they break down—the best way to avoid this is by making sure that they have enough firmness from the start.


In order to choose the right foam for your seat cushion, you’ll want to first consider softness. Softness is a measure of how much a material gives when pressure is applied to it. The higher the softness rating, the more give the material will have. In other words, a high-softness foam will be softer than one with lower softness rating. This is important because if you are sitting on hard furniture all day long (like most work chairs), then your body needs something that will help relax it and provide support where needed without being too stiff or uncomfortable. Softness is measured using a durometer—a device used by manufacturers in their quality control process—which measures hardness in terms of grams per square centimeter (G/cm2).


  • Compression

The foam should be able to hold its shape and not become soft or hard when you sit on it. The foam should not lose its shape and become flat after you sit on it for a while. The cushion should still have the same shape as when you first bought it years later, so that means the right amount of compression is needed in order to make your cushion last longer and keep its original form over time!

Seat cushions should be chosen with four main factors in mind: density, firmness, softness, and compression.

When choosing foam for your furniture, it’s important to remember that there are four main factors you should consider: density, firmness, softness, and compression.

Density is one of the main things you’ll look at when choosing foam for a seat cushion. The density of foam refers to the amount of air or gas that’s been trapped inside the cell structure. The higher this number is (or lower), the firmer your cushion will be. A low-density foam softens with use and conforms to your body shape; in other words, over time it will become more like memory foam. High-density foams are harder but don’t soften much over time; they’re often used in high-tech medical devices like hospital beds because they offer excellent support without compromising comfort or performance over long periods of use


There are many types of foam available on the market today. The best kind for your needs will depend on what you want in a cushion. In this article, we’ve outlined some of the most important factors to consider when making your decision and given some examples of each type of foam so that you can get started right away!

Leave a Reply