How to Use Urethane to Insulate Your Garage

  • Post comments:0 Comments
  • Reading time:5 mins read


There are quite a few options for insulating your garage, but urethane foam is one of the best ways to go. It’s simple to install and will offer you the best energy efficiency possible, saving you money on energy costs in the long run. In this guide, we’ll show you exactly how to insulate your garage with urethane foam. We’ll cover everything from prepping the space and buying supplies, to applying the foam itself. Plus, we’ll tell you what else urethane is used for so that if you don’t need it for insulation purposes, it won’t just be sitting around gathering dust!

Step 1: Close Up Your Garage

The first step in insulating your garage with urethane is to close up all doors and windows. This will ensure that no air can escape from the room until you’re ready for it to do so. Next, make sure that any children or pets are kept away from the area during this process, as foam does release volatile gases when exposed to heat.

In addition to closing up your garage, it’s important that you turn off all fans and air conditioners in the area as well as any lights (except the one used for this project). You must also make sure that your garage is completely dry before starting; if there is any moisture present then it could cause dangerous condensation during this process. Lastly, make sure that there are no toys lying around on any surfaces of your garage floor—these may get caught underneath newly installed insulation and cause damage later down the road!

Step 2: Set Up Your Application Equipment

Once you’ve picked up your materials, it’s time to set up your application equipment. You will need:

  • A paint sprayer, preferably electric or pneumatic for larger jobs.
  • A spray gun with a 4-6″ hose and tip size appropriate for the foam product you’re using (for example, 3/16″ for XPS).
  • A paint tray or some other container to hold all of the foam you plan on spraying. It should be at least 1 gallon in volume and ready before starting any spraying!

Step 3: Prepare the Surface

The next step is to prepare the surface. Use a putty knife or scraper to remove any loose paint or dirt that might be on the wall. Clean off any rust or loose paint with a wire brush, then vacuum up all of the dust. A tack cloth can be used to pick off any remaining dust if needed, but don’t overdo it—it’s better to leave some than go overboard and risk damaging your insulation later (as well as possibly exposing yourself to harmful fumes). Finally, wipe down the wall with a damp rag so that it’s free of dust and debris prior to applying urethane foam insulation.

Step 4: Apply Urethane Foam to the Interior Walls and Ceiling

  • Use a foam gun to apply the foam. A foam gun is a tool that dispenses urethane in liquid form, just like a sprayer does for paint. You can buy one at your local home improvement store for about $30-$50.
  • Use a sprayer to apply the foam. If you’d rather not go out and buy an expensive tool just for this project, then consider using an inexpensive pump-up garden sprayer instead—it’s easy to fill up with urethane (you’ll need about 5 gallons) and cost only around $15-$20 per unit!
  • Use a roller to apply the foam. Rollers are great for applying anything from glue to insulation because they provide even coverage without dripping or dripping too much onto any part of your surface area unnecessarily wastefully so use them often when working on projects like this one!

Step 5: Let It Dry and Fill in Holes as Needed

Let the urethane foam dry for at least 24 hours before moving on to the next step. Use a putty knife to fill in any holes or cracks that you may have missed, and make sure that the surface is completely smooth. If it’s not, use your paintbrush to apply a thin coat of paint over the entire building, including all sides and corners. This will prevent water from getting into areas where it shouldn’t be going, which can cause mold growth or other issues in the future.

Insulating your garage with urethane foam is a lot easier than it sounds, and will help you save money on heating and cooling your home.

Urethane is a great product to use when you’re insulating your garage. It’s easy to apply, install, and clean up after installation. The foam can be used in your garage as well as other places around the house. If you want an affordable way to insulate your garage or other areas of your home without having to worry about the mess of traditional insulation, urethane foam is definitely worth considering.


We hope you found this guide to be helpful. If you’re still feeling unsure about how to go about insulating your garage with urethane foam, it might be best to leave the job up to professionals. We wish you all the best on your home improvement journey!

Leave a Reply