Introduction

Adding insulation to your home is one of the best ways to help control energy costs. It can help you keep out the cold in winter, and keep it cool in summer. Insulation can also reduce condensation that leads to mold, mildew and other issues. Fiberglass insulation is a popular type of insulation because it’s affordable, durable and easy to install. Here are some common questions about fiberglass insulation:

Why use fiberglass insulation?

• Fiberglass insulation is affordable. This is one of the biggest reasons why people choose to use it over other types of insulation like cellulose or foam. It’s also relatively easy to install, so you can save on labor costs as well as material costs.
• It does a great job at insulating your home because it’s made from tiny glass fibers that trap air pockets between them. When there is an air pocket trapped in front of the fiberglass insulation, heat from outside cannot easily penetrate through the wall or ceiling where it is installed and into your home’s interior during winter months or summer seasons respectively. This helps keep your house warm so you don’t have to turn up your heat as much which will save you money on energy bills!
• Another benefit of using fiberglass for insulating purposes is that it does not absorb water like traditional materials such as cotton batting do when exposed over time due to its composition being different than other materials used for these purposes such as cellulose (which consists mostly out of recycled toilet tissue) or even straw bales used by farmers back when they needed something cheap yet sturdy enough to protect their animals against predators who would kill them otherwise….

How much will it cost to insulate my home?

Adding insulation to your home is a great way to save on energy costs. If you are wondering how much it will cost, the honest answer is that it depends on the size and age of your home and what type of insulation you choose.

The cost of fiberglass insulation varies with size and type, but generally speaking the average price per square foot ranges between $1-2 dollars per square foot (PSF). Other types such as cellulose or foam are more expensive at around $3-5 PSF. The best thing about fiberglass is that it’s easy to install so whether you hire someone or do it yourself; chances are installation won’t take long either way!

For example: A typical house built in 1950 has a R-value (insulation level) between 13 – 15 throughout most of its walls & ceilings… Adding just one inch (10 PSF) would raise this rating by almost half! This means an immediate increase in comfort while reducing energy consumption by as much as 15%.

How much energy will I save?

Your savings will depend on your existing insulation, the type of insulation that you add, and the number of rooms in your home that you insulate.

For example: If your existing insulation is minimal and you upgrade to fiberglass batts with an R-value of 8, you’ll save approximately 15% on your energy bills. On average, a typical home has about 10% savings after installing fiberglass batt insulation compared to no insulation at all! If your existing insulation is good quality (e.g., spray foam or blown-in cellulose) and you upgrade to high performance fiberglass batts with an R-value of 12 or higher, then it’s likely that another 5% could be saved – for a total possible savings of 20%.

Will insulation affect the inside temperature?

Insulation will not affect the temperature of your home or room. In fact, it will help maintain a consistent temperature in your house by keeping heat inside when it’s warm out and keeping cool air inside when it’s cold outside. Insulation can also help stabilize temperatures during extreme weather conditions such as hurricanes or blizzards by providing extra protection from wind and rain damage.

How do I choose the right type of insulation for my home?

It’s important to choose the right type of insulation for your home. There are many options available and each has its own benefits and drawbacks.

The thickness of your insulation should be based on what you need it to do: insulate, provide soundproofing or resist heat transfer. The best way to determine this is by contacting an expert who can recommend a product that best suits your needs.

The material used in the construction of your home will dictate which insulation is right for you; fiberglass, cellulose or foam are all good choices depending on where they’re being placed in relation to other materials such as wood studs, drywall or glass windows (allowing more efficient energy transfer). In addition, there are various types of cellulose available including recycled newspaper products that offer longer durability without harming trees like virgin pulp sourced from tree farms do!

Location matters too because some areas may require additional protection against moisture damage due to high humidity levels near lakes/rivers etc., whereas others don’t require anything special thanks their dry climate conditions (dry air doesn’t hold heat very well so this helps keep costs low).

Does it help to control humidity and moisture?

Fiberglass insulation works to control humidity and moisture in your home by helping to keep you warm when it’s cold outside and cool when it’s hot. It is not a vapor barrier, so moisture can still pass through it—but fiberglass does an excellent job of preventing condensation on the inside of your walls and ceiling, which happens when warm air touches a cooler surface (such as drywall). Fibrglass helps keep your house dry by trapping most of that excess moisture inside the walls where it belongs.

Can I install it myself?

Installing fiberglass insulation is a great way to lower your energy bills, but it also requires some work on your part. While installing the insulation yourself isn’t impossible, most experts recommend that you hire a professional for this task. Hiring a professional will ensure that you get proper advice and installation done safely, allowing you to save money in the long run.

If you’re not sure if you should hire someone to install fiberglass insulation or do it yourself, consider these questions: Do I have any experience with installing other types of insulation? Can I read instructions well enough that they don’t confuse me? If something goes wrong during installation, will I know how to fix it? If I’m unsure about anything related to this project (for instance whether or not my current flooring can withstand additional weight), who do I reach out for help?

Should I add insulation to other parts of my house too?

The benefits of adding insulation to your home are not limited to keeping the temperature comfortable in the winter and summer. If you’re considering adding insulation, we recommend that you also consider insulating other parts of your house, such as:

• The garage
• The attic (or ceilings)
• Walls between rooms or walls that don’t contain windows or doors

Insulation can help with heating and cooling bills by reducing the amount of energy needed to heat or cool your space. It also helps keep moisture from penetrating walls, as well as from damaging them by collecting dirt and dust on their surfaces. Insulation can also help prevent leaks from occurring due to water damage caused by storms blowing off roofs or snow melting off gutters into eaves before draining away properly.

Can I add fiberglass insulation to an existing structure?

Yes, you can add fiberglass insulation to an existing structure. First, however, you’ll need to remove the existing insulation. Next, make sure that the surface is clean before installation and make sure it’s dry as well. If your home was built after 1990 and has wall cavities that are exposed on both sides of the wall (that is, they’re not completely filled), then adding new fiberglass insulation isn’t hard at all—just pull out what’s already there and put in new stuff! If you’re lucky enough to have unoccupied space between joists or studs where no wood is present at all (or if there are other places like this), then why not consider putting some fiberglass batts into those areas? In either case—and especially if it’s just one room—you should definitely consider adding some more insulation somewhere around your house!

Find out how fiberglass insulation can help you save on your energy bill.

If you’re looking for ways to save money and stay comfortable in your home, insulation is a great option. Not only does it help you save on your energy bills, but it also keeps the air in your home at a consistent temperature. This can be especially beneficial during the winter months when many people struggle with keeping warm or cool enough on their own.

Fiberglass insulation is an effective way of adding more warmth or cooling power into any room of your house by preventing heat from escaping through cracks and gaps between drywall panels and other surfaces that are not completely sealed up yet. Furthermore, fiberglass insulation has been shown to help reduce noise levels throughout rooms within households where children live so they don’t have as much difficulty sleeping throughout the night – which makes both parents happier too!

Conclusion

We want to be a part of your home improvement needs. Check out our website and find out how we can help you!